当前文件路径：NChat/NChart.DBHelper/Properties/AssemblyInfo.cs

		            
 1using System.Reflection;
 2using System.Runtime.CompilerServices;
 3using System.Runtime.InteropServices;
 4
 5// General Information about an assembly is controlled through the following 
 6// set of attributes. Change these attribute values to modify the information
 7// associated with an assembly.
 8[assembly: AssemblyTitle("NChart.DBHelper")]
 9[assembly: AssemblyDescription("")]
10[assembly: AssemblyConfiguration("")]
11[assembly: AssemblyCompany("hj")]
12[assembly: AssemblyProduct("NChart.DBHelper")]
13[assembly: AssemblyCopyright("Copyright © hj 2007")]
14[assembly: AssemblyTrademark("")]
15[assembly: AssemblyCulture("")]
16
17// Setting ComVisible to false makes the types in this assembly not visible 
18// to COM components.  If you need to access a type in this assembly from 
19// COM, set the ComVisible attribute to true on that type.
20[assembly: ComVisible(false)]
21
22// The following GUID is for the ID of the typelib if this project is exposed to COM
23[assembly: Guid("7795bed3-730e-40f9-ab60-b366484481d1")]
24
25// Version information for an assembly consists of the following four values:
26//
27//      Major Version
28//      Minor Version 
29//      Build Number
30//      Revision
31//
32// You can specify all the values or you can default the Build and Revision Numbers 
33// by using the '*' as shown below:
34// [assembly: AssemblyVersion("1.0.*")]
35[assembly: AssemblyVersion("1.0.0.0")]
36[assembly: AssemblyFileVersion("1.0.0.0")]
37